{"product_id":"fk2-fk8-instant-jailbreak","title":"FK2\/FK8 INSTANT JAILBREAK","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*ONLY AVAILABLE WITH FLASHPRO PURCHASED THRU US, ANY ORDERS FOR THIS ALONE WILL BE CANCELLED\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline; color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eYOU MUST SEND US YOUR VIN WHEN ORDERING\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/65y6ndM95lg\"\u003eHow To Instant Jailbreak\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDO NOT TRY TO UPLOAD TO THE ECU BEFORE JAILBREAKING!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFrom the factory FK2\/FK8 ECUs cannot be programmed over OBDII and must be unlocked ('jailbroken').\u003c\/p\u003e\n\u003cp\u003eAn 'Instant Jailbreak' allows your FlashPro to jailbreak your FK2\/FK8 ECU in your vehicle without the need to remove the ECU.\u003c\/p\u003e\n\u003cp\u003eYou will need a FlashPro and the FlashProManager software installed.  It does not matter if the FlashPro is locked to the ECU or not.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBefore purchasing an instant jailbreak\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure you ECU is supported. See 'specification'.\u003c\/li\u003e\n\u003cli\u003e2023+ FL5 Type R cannot use the instant jailbreak.\u003c\/li\u003e\n\u003cli\u003e2020-2021 US vehicles need to bypass the CAN gateway using the \u003ca href=\"https:\/\/madscientistauto.com\/products\/hondata-fk8-jailbreaker-2020-us-civic-type-r\"\u003eJAILBREAKER\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor the instant jailbreak to work. If you try to use an instant jailbreak on to 2020+ vehicle without the jailbreaker, return the ECU to stock, then jailbreak using the\u003cspan\u003e \u003ca href=\"https:\/\/madscientistauto.com\/products\/hondata-fk8-jailbreaker-2020-us-civic-type-r\"\u003eJAILBREAKER\u003c\/a\u003e\u003c\/span\u003e.\u003c\/li\u003e\n\u003cli\u003eIf your ECU has been 'bench reflashed' then the ECU must be returned to 100% original condition for jailbreaking.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003ePurchasing the instant jailbreak\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIt is important to enter your VIN correctly. US vehicle VINs start with SHHFK8.  Outside the US VINs may start with SHHFK8, FK8 or FK2. For this reason we recommend using the 'Copy' button on the 'FlashPro' window to copy and paste the VIN rather than hand entering the VIN.  The VIN needs to be entered in uppercase only.  Don't mistake the letter O for zeros and add any extra spaces (before and after). \u003c\/p\u003e\n\u003cp\u003eIf you type in your VIN our observation is that there is a 25% chance you will make a mistake and it will not work for you, so you will have to contact us and wait to get it fixed.  If you take the easy option of using the copy button in FlashProManager then you have a 100% chance of it working straight away.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePlug the FlashPro into your vehicle, switch on the ignition.  Open the 'FlashPro' window and select the 'Jailbreak' tab.  Check the vehicle VIN is shown.\u003c\/li\u003e\n\u003cli\u003eCopy the VIN (to the computer clipboard).\u003c\/li\u003e\n\u003cli\u003ePurchase this product 'Instant Jailbreak' using your vehicle VIN.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eBefore jailbreaking\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure your software is the latest beta version.\u003c\/li\u003e\n\u003cli\u003eMake sure your FlashPro is registered\u003c\/li\u003e\n\u003cli\u003eDo not jailbreak your ECU if it is in recovery mode. You can tell if your ECU is in recovery mode by looking in FlashProManager at the status icons in the bottom left corner.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eJailbreaking\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWhatever happens\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edo not switch off the ignition or try to start the engine or disconnect the battery\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003euntil the jailbreak process is successfully completed.  If you do any of those things you will need to send the ECU to Hondata for recovery.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIf you have a 2020+ plug in the\u003cspan\u003e JAILBREAKER\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003ePlug the FlashPro into your vehicle, switch on the ignition.  Open the 'FlashPro' window and select the 'Jailbreak' tab.\u003c\/li\u003e\n\u003cli\u003eEnter the Invoice \/ Order ID number from your online purchase. The  Invoice \/ Order ID number is found in the email sent after completing your order and also in your history.\u003c\/li\u003e\n\u003cli\u003eClick 'Instant Jailbreak'.  The process takes 30 seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf something goes wrong do not switch off the ignition or try to start the engine or disconnect the battery.  Try the jailbreak again, and if that does not work unplug the FlashPro from both the laptop and OBDII connector, restart the FlashProManager software and try the jailbreak again.  Again, don't switch off the ignition!\u003c\/p\u003e","brand":"Mad Scientist Auto","offers":[{"title":"Default Title","offer_id":46652410560686,"sku":null,"price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0262\/6699\/2739\/files\/bosch-ecu-single-500x500.jpg?v=1751729814","url":"https:\/\/www.madscientistauto.com\/products\/fk2-fk8-instant-jailbreak","provider":"Mad Scientist Auto","version":"1.0","type":"link"}